• True sine wave 120 volt AC output.
• Total harmonic distortion less than 4% for all loads up to the Surge Output Rating.
• Resilient electronic protection designed to handle output short circuits and output overloads.
• Built-in Volt Guard Battery Voltage Monitor, providing ground control for an automatic throttle toinsure maximum alternator output when needed.
• Load Demand Feature to conserve DC power under no load conditions.
• 15 amp GFCI Duplex Receptacle.
• Two AC output circuits (one GFCI protected) with individual circuit breakers.
• Terminal block for hardwiring the AC outputs.
• Automatic shutoff for low or high battery voltage, overload or over temperature.
• Remote control circuit capable of single wire input (12 or 24 volt input) or 2 wire (12 volt signaland return).
• Remote indicator light (LED) circuit to operate a remote inverter ON/OFF status LED.
• Remote Low Battery Warning Circuit, providing ground control for a remote warning device whenbattery voltage falls to 11.0 (22.0) Volts DC.
• Terminal block for wiring remote control, remote Inverter ON/OFF LED, remote Low DC Warningdevice and Auto Throttle control circuits.
• Indicator lights for Auto Throttle Signal, Low Battery Warning, Low Battery Shutoff, Over
• Temperature Shutoff, Overload and Inverter ON/OFF/Load Demand status.
• All controls and wiring connections accessible from the front of the inverter.
• Thermostatically controlled cooling intake fan.
• Factory selectable Load Demand ON/OFF. (ON is standard.)
• Factory selectable Five Minute Automatic Restart after shutdown due to fault. (OFF is standard.)
• Owners Manual | Download

Product Reviews