Manufacturer Info
DIN rail mount with set-screw compression terminals, #14 to 2 AWG (1.62 mm to 6.54 mm
Product Highlights
Product Highlights
- DIN rail mountable
- Can be used for DC sources, inverters or load circuits
- Contact OutBack for additional information
DIN-15-AC | 15 Amp 120Vac 50/60Hz single pole 0.50 (13 mm) wide. Branch Circuit Rated 10k AIC |
DIN-15D-AC | 15 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC |
DIN-20-AC | 20 Amp 120Vac 50/60Hz single pole 0.50 (13 mm) wide. Branch Circuit Rated 10k AIC |
DIN-20D-AC | 20 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC |
DIN-25D-AC | 25 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC |
DIN-10-AC-277 | 10 Amp 277Vac 50/60Hz single pole 0.5 (13 mm) wide |
DIN-15-AC-277 | 15 Amp 277Vac 50/60HZ Single Pole 0.5 (13 mm) wide |
DIN-30-AC-277 | 30 Amp 277Vac 50/60Hz Single Pole 0.5 (13 mm) wide |
DIN-30D-AC-480 | 30 Amp 277/480Vac 50/60Hz Dual Pole 1.0 (26 mm) wide |
DIN-30T-AC-480 | 30 Amp 277/480Vac 50/60Hz Three Pole 1.5 (39 mm) wide |
DIN-50-AC-277 | 50 Amp 277Vac 50/60Hz Single Pole 0.5 (13 mm) wide |
DIN-50D-AC-480 | 50 Amp 277/480Vac 50/60Hz Dual Pole 1.0 (26 mm) wide |
DIN-50T-AC-480 | 50 Amp 277/480Vac 50/60Hz Three Pole 1.5 (39 mm) wide |
DIN-60-AC-277 | 60 Amp 277Vac 50/60Hz Single Pole 0.5 (13mm) wide |
DIN-60D-AC-480 | 60 Amp 277/480Vac 50/60Hz Dual Pole 1.0 (26mm) wide |
Other Products in This Category
Outback Power, FW-CCB2-T, Mounting bracket for two top mounted FM60/80 charge controllers on FW500 and FW1000 DC enclosures. Includes mounting screws. (Not compatible with FM100-300VDC charge controller.)
$115.66 $88.97
$115.66 $88.97
Outback Power, FW-SHUNT250, 250 Amp 25 mVDC current shunt with attached terminal bus bar for mounting on top of a FX Series Inverter/Charger. Includes bus bar for connection to inverter's DC negative terminal
$113.70 $87.46
$113.70 $87.46
Outback Power, FW-CABLE250-15R, 250 Amp 4/0 AWG DC Cable 15 Inches (38 cm) long with 3/8" (.95 cm) Ring Terminals on Both Ends. Red heat shrink.
$129.39 $99.53
$129.39 $99.53
Outback Power, FW-CCB, Mounting Bracket for one side mounted FM60/80 charge controller on GSLC, FW500 and FW1000 DC enclosures. Includes mounting screws. (Not compatible with FM100-300VDC charge controller.)
$123.51 $95.00
$123.51 $95.00
Outback Power, FW-SHUNT500, 500 Amp 50 mVDC current shunt with attached terminal bus bar and one white insulator
$96.06 $73.89
$96.06 $73.89
Outback Power, FW-CBUS-12, Reversible Combiner Bus Bar for up to twelve 150 VDC rated breakers or up to eight 600 VDC rated fuse holders with dual 2/0 AWG output lug terminals
$83.15 $63.96
$83.15 $63.96
Outback Power, FW-CABLE250-36W, 250 Amp 4/0 AWG DC Cable 36 Inches (91.5 cm) long with 3/8" (.95 cm) Ring Terminals on Both Ends. White heat shrink.
$121.54 $93.50
$121.54 $93.50
Outback Power, FW-CCB2, Mounting bracket for two side mounted FM60/80 charge controllers on GSLC, FW500 and FW1000 DC enclosures. Includes mounting screws and flexible conduit. (Not compatible with FM100-300VDC charge controller.)
$129.39 $99.53
$129.39 $99.53
Outback Power, FW-CBUS-8, Reversible Combiner Bus Bar for up to eight 150 VDC rated breakers or up to six 600 VDC rated fuse holders with dual 2/0 AWG output lug terminals
$62.87 $48.36
$62.87 $48.36