Manufacturer Info
EasyStart Breeze Soft Starter
Choose from 2 different models to best meet your specific needs.
EasyStart Breeze - At a Glance
The EasyStart Soft Starter is the ultimate soft starter for RV air conditioners. With its innovative adaptive learning technology, this compact and weatherproof device reduces startup current by up to 75%.
In addition, customers can register for an extended warranty for their compressor motor when installing EasyStart on an RV Rooftop air conditioner that are six years old or less. Double Down Warranty
A closer look
EasyStart Breeze
When installing EasyStart into 220-240V SMX A-288/282/281 control applications that use the triac to switch power to the compressor, it is necessary to replace the triac with a relay. If the triac is not replaced, the EasyStart and any pump relay triggers may suffer damage and ultimately fail. A replacement relay specifically designed for this application is available at this link. Please note that this is not required for 115V SMX applications, and the triac is still safe to use.
Choose from 2 different models to best meet your specific needs.
EasyStart Breeze - At a Glance
- Compatible with RV rooftop or basement air conditioners and heat pumps.
- Significant reduction of up to 75% in starting current.
- Real-time fault detection technology is available to accurately identify and prevent issues immediately.
- 40% reduction in enclosure size when compared to our 364 model.
- Silences the start-up noise of your AC, Say goodbye to those bumps in the night.
- Experience boondocking in remote areas with our RV soft starter and a portable generator!
- All Breeze Features + Bluetooth Diagnostics Add-on
- Note: 364 enclosure size is larger than the Breeze model
- Built-In Technical Support Submission for issues.
- Diagnose and correct issues from a distance without the need to disassemble any components, ensuring a safe and seamless troubleshooting process.
- Need to move EasyStart to a new AC? Use our remote one-touch process to easily teach our soft starter about your new unit.
- Convenient on-Demand firmware updates when available.
- Our free phone application (available on both iPhone and Android) grants access to all features.
The EasyStart Soft Starter is the ultimate soft starter for RV air conditioners. With its innovative adaptive learning technology, this compact and weatherproof device reduces startup current by up to 75%.
In addition, customers can register for an extended warranty for their compressor motor when installing EasyStart on an RV Rooftop air conditioner that are six years old or less. Double Down Warranty
A closer look
- The overall size of the IP65 enclosure has been significantly reduced, making it the smallest in the Easystart family of products, including the mount. (Breeze model)
- Improved startup current reduction and product reliability are a direct result of all-new hardware and software refinement. Our advanced technology and quality controls further increase performance and longevity.
- Our sophisticated multi-start, one-time, resettable learning algorithm is designed to optimize performance and overall efficiency.
- Highly efficient Power Interruption and Brownout protection to prevent potential damage to compressor motors due to immediate restart attempts.
- Our advanced intelligent short-cycle delay timer provides the necessary delay to any short-cycle restart while preventing unnecessary delay for normal-cycle restarts. This reduces any potential damage and wear and tear on the compressor motor, ensuring its longevity.
- Precise Overcurrent and Stall detection to protect compressor motors from harmful sustained or abrupt low-voltage conditions. It's designed to safeguard your compressor and ensure that your system remains reliable and long-lasting.
EasyStart Breeze
- Voltage 100 to 125 - VAC 50 - 60 Hz
- Enclosure: 5.75L x 3.5W x 2.0H in (146L x 88W x 50H mm)
- Wire Harness: 40 in (1m)
- Enclosure: 7.64L x 3.58W x 2.50H in (194L x 91W x 64H mm)
- Wire Harness: 40 in (1m)
When installing EasyStart into 220-240V SMX A-288/282/281 control applications that use the triac to switch power to the compressor, it is necessary to replace the triac with a relay. If the triac is not replaced, the EasyStart and any pump relay triggers may suffer damage and ultimately fail. A replacement relay specifically designed for this application is available at this link. Please note that this is not required for 115V SMX applications, and the triac is still safe to use.