Features

• Proven technology
• Rugged & Reliable for years of safe and trouble free operation
• Multiple battery voltages supported by each model
• Pure Sine Wave output - 110 VAC or 220 VAC at 50 or 60 Hz fully regulated output, exactly the same as household AC
• Hard Wire and Plug-In (NEMA 5-20 or Euro CEE 7/7) AC output connections standard
• Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
• Digital Signal Processor controlled
• State-of-the art MosFet technology for efficient and reliable operation
• Toroidal transformer type output to protect computers and other sensitive equipment from surges and spikes
• ON-OFF switch illuminated by AC output for positive indication of proper operation
• Thermostatically controlled fan
• Programmable low voltage warning and shutdown to protect the batteries
• Over voltage and over temperature warning and shutdown to protect the inverter
• Current Limiting and Short circuit protection
• Isolated input for positive or negative ground operation
• Diagnostic LEDs and Audible Alarm
• Three year parts and labour warranty
• Product Datasheet | Download
• Product Manual | Download

The IPSi Series of "Intelligent Pure Sinewave" Inverters are designed specifically for running computers and other sensitive AC loads in rugged mobile and other off-grid environments.

Two standard AC receptacles (circuit breaker protected) plus a dedicated hardwire connection provide for easy connection of loads. Inverters may be fitted with any one of these receptacles and/or a hard wired AC output connection.

NA 110VAC 60HZ | NA 220VAC 60HZ | Worldwide 220VAC 50HZ

Models are available for 110 or 220 Volts AC Out at 50 or 60 Hz (user selectable), and to operate from 20-45 or 40-80 Volts DC In to cover all standard DC battery voltages from 24 to 64 volts nominal (includes 72V Rail).

Using the free to download "Inverter Wizard" software, the user can select output frequency, output voltage and low voltage shutdown parameters from any laptop through the standard usb interface.

Function	Inverter
Conversion	DC to AC
Power Level	3600
Input Volts	100 - 140 VDC
Output Volts	220 VAC
Output Amps Continuous	15
Output Amps Peak	18
Input/Output Isolation	Yes
Technology	Digital
Product Series on website	IPSi3600
Option Codes	'Z' No Conformal Coating (Any Model), 'Y' IP67 Certified, 'X' Ruggedized & Wide Temp, 'W' IP66 Water Resistant, 'U' Safety Special Inspection (CSA/UL), 'M' Military Rugged, 'J' MIL810 Tested Only, 'I' MIL461 Tested Only, 'E' European ROHS compliant, 'C' MIL461F & MIL810G Tested, 'A' AC Detect & Autoswitch (Off Line UPS)

Product Reviews