Manufacturer Info
Model Number: APKE00013
11.4kW 30 PWRcell Inverter W/ CTS
11.4kW 30 PWRcell Inverter W/ CTS
- AC Output Voltage: Grid-Tie: 120/208, 30 VAC
- Maximum AC Power Output: Backup: 7,600 W
- AC Output Voltage: Backup: 120/208, 10 VAC
- AC Circuit Breaker: Backup: 50 A
- DC Input Voltage Range: 360 - 420 VDC
- Nominal DC Bus Voltage: 380 VDC
- Supported Battery Types: PWRcell Battery
- Batteries Per Inverter: Up to 2
- Supported PV Optimizers: PV Link
- Maximum Recommended DC Power from PV: 15 kW
- Internal DC Distribution Breakers: 4x 2P30A
- DC Fuses on Plus and Minus: 40 A
- 2-Pole Disconnect: Yes
- Protections: Ground-Fault Isolation Detection, Reverse-Polarity
- AC Topology: Transformerless
- Peak Efficiency: 97.3%
- CEC Weighted Efficiency: 97%
- Operating Temperature: -20 to 50 C (-4 to 122 F)
- Dimensions: 622 x 489 x 203 mm (24.5" x 19.25" x 8")
- Compliance: UL 1741 SA, CSA 22.2, IEEE 1547, Rule 21
- Compliance (Cont.): Rule 14H
- Peak Motor Starting Current (2 Sec.): 50 A, RMS
- Max. Cont. Grid-Tied AC Power @ 122 F (50C) : 11,400 W
- INML-OMNL PWRCELL INV EN | Download
- INML-OMNL PWRCELL INV SP | Download
- INML-OMNL PWRCELL INV FR | Download
- INST PWRCELL PRE-INSTALL CHECK GEN-EN | Download
- INST PWRCELL PRE-INSTALL CHECK GEN-SP | Download
- INST PWRCELL PRE-INSTALL CHECK GEN-FR | Download
- PWRVIEW SYSTEM SETUP GUIDE | Download
- PWRCELL COMMISSIONING QUICK START EN | Download
- PWRCELL COMMISSIONING QUICK START SP | Download
- PWRCELL COMMISSIONING QUICK START FR | Download
- PWRVIEW SYSTEM SETUP GUIDE SP | Download
- PWRVIEW SYSTEM SETUP GUIDE FR | Download
- SPEC 7.6KW 10 & 11.4KW 30 PWRCELL INV EN | Download
- PWAR PWRCELL LIMITED WARRANTY | Download
- WIRING DIAGRAMS PWRCELL SYSTEM | Download