Manufacturer Info
PLC Line Filter
The PLC Line Filter, manufactured by Astrodyne, separates power line communication domains in Enphase commercial installations when multiple IQ Gateways are located on a single utility transformer, or site loads generate enough electrical noise to disrupt communications. The PLC Line Filter is designed to work with IQ8P-3P and IQ8H-3P Microinverters.
Technical Specifications
The PLC Line Filter, manufactured by Astrodyne, separates power line communication domains in Enphase commercial installations when multiple IQ Gateways are located on a single utility transformer, or site loads generate enough electrical noise to disrupt communications. The PLC Line Filter is designed to work with IQ8P-3P and IQ8H-3P Microinverters.
Technical Specifications
- Maximum continuous current per line: 400 A (temperature adjusted to 65C)
- Maximum voltage: 480 VAC +10%
- Frequency: 50/60 Hz
- Power dissipation: 75 W max (current dependent)
- Ambient temperature range: -40C to +65C
- Phase coupler: Not required
- RoHS/Safety: Yes/cURus, EN60939
- Terminal style/size: Ground terminal = M10, bus bar = 25 mm with M10 bolt
- Typical leakage current: <10 mA (480 V/60 Hz or 50Hz)
- Insertion loss: (80??ç??130 kHz) >50 dB
- Impedance: (80??ç??130 kHz) >100
- PLC Line Filter quick install guide | Download
- PLC Line Filter quick install guide - French | Download
- PLC Line Filter
| Length | 17.36 in |
| Width | 6.69 in |
| Height | 5.90 in |
| Weight | 31.0 lbs |
