Manufacturer Info
MNPV8HV Disco 4X PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is 100 amp load break rated or 175 amps depending on configuration, 600 volt max.
The MNPV8HV-Disco 4X's red handled is LOCKABLE IN THE OFF POSITION!
The MNPV8HV-Disco 4X's red handled is LOCKABLE IN THE OFF POSITION!
- Convertible configuration (field configurable)
- Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
- 4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
- Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
- Disconnect has built in shunt trip with positive feedback
- Birdhouse compatible
- Load Break Rated
- Optional PV connected power supply
- Optional AC connected power supply for redundancy
- Type 4X aluminum enclosure (no rust, won't turn to dust)
- 90 C connections
- See thru deadfront & color coded busbar guards included
- Fuseholders (MNTS) installed
- 15a/600v fuses installed
- Meets 2014 NEC 690.12
- Warranty - 5 yrs.
- Listed by ETL for US & Canada
- Made in the USA
- ATM MNPV8HV and MNPV16HV Disco | Download
- MNPSB Instructions | Download
- HV Disconnecting Combiner Manual | Download
- MNBirdhouse | Download
- One MNSPD-600 (Surge Protection Device)
- Eleven 1/2" strain reliefs (MNSR-1000)
- Eleven 1/2" LOCKNUTS
- Seven HOLE PLUGS with Gaskets (MNHOLE PLUG 1/2)
- One 10-32 X 7/8" BOLT
- Two 10-32 X 3/8" FHP
- Six 10-32 KEPS NUT
- One TERMINAL PIN 18-22 AWG.
- One TERMINAL PIN 10-12 AWG.
- Two RING TERMINAL 10-12 AWG.
- One BUSBAR, NEGATIVE OUT 2
- One BUSBAR, POSITIVE OUT 2
- One BLUE WRENCH (MNWRENCH)
Other Products in This Category
Midnite Solar, MNXWP6848-2CL150, Pre Wired Schneider Electric Conext XW PRO 6848 120/240 vac Inverter for Off grid or Battery based Grid Tie., 6800 watt 48 volt inverter. AC Bypass Assembly included, Classic 150 installed. The second Classic will include Left hand mounting bracket, SPD300, 2 DC breakers and wiring.
$14,131.21 $10,870.16
$14,131.21 $10,870.16
Midnite Solar, MNXWPAC6848, Schneider Conext XW PRO 6848 120/240 vac Inverter, AC Bypass assembly built in, 6800 watt 48 volt inverter
$11,446.71 $8,805.16
$11,446.71 $8,805.16
Midnite Solar, MNBCB 500/50, 500amp battery combiner box Includes a 500amp Positive and Negative bus bar with 3/8 inch studs.
$697.97 $536.90
$697.97 $536.90
Midnite Solar, MNE300ROSIE-240P, The Rosie E-Panel is an AC and DC enclosure offering over-current protection (OCP) and disconnects for AC IN, AC OUT, and to the battery bank.
$955.68 $735.14
$955.68 $735.14
Midnite Solar, MNXWP6848-CL200, Pre Wired Schneider Electric Conext XW PRO 6848 120/240 vac Inverter for Off grid or Battery based Grid Tie., 6800 watt 48 volt inverter. AC Bypass Assembly included, with Classic 200 and high voltage input breakers instead of a Classic 150.
$12,751.38 $9,808.75
$12,751.38 $9,808.75
Midnite Solar, MNCLIP1.5KAC0X.X, 1,500 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic
$2,308.67 $1,775.90
$2,308.67 $1,775.90
Midnite Solar, MNXWP6848-CL150, Pre Wired Schneider Electric Conext XW PRO 6848 120/240 vac Inverter for Off grid or Battery based Grid Tie., 6800 watt 48 volt inverter. AC Bypass Assembly included, Classic 150 installed.
$12,724.53 $9,788.10
$12,724.53 $9,788.10
Midnite Solar, MNXWP6848-CL250, Pre Wired Schneider Electric Conext XW PRO 6848 120/240 vac Inverter for Off grid or Battery based Grid Tie., 6800 watt 48 volt inverter. AC Bypass Assembly included, with Classic 250 and high voltage input breakers instead of a Classic 150.
$13,014.46 $10,011.12
$13,014.46 $10,011.12
Midnite Solar, MNXWP6848D-2CL200, Pre Wired Dual Schneider Electric Conext XW PRO 6848 120/240 vac Inverter for Off grid or Battery based Grid Tie., Dual 6800 watt 48 volt inverters. AC Bypass Assembly included, with 2 Classic 200's and high voltage input breakers instead of a Classic 150's.
$24,643.71 $18,956.70
$24,643.71 $18,956.70