Manufacturer Info
PMBC Series
The PMBC Series Battery Charger Maintainer is the best choice to provide proper battery support, the most important step for the vehicle before beginning any Diagnostics, Calibration, Reflash, or electronic scan process.
Standard Battery chargers or a jump box are not recommended as they will not provide the proper battery support to the vehicle. Battery chargers can overcharge and "cook" a battery, and jump boxes can go dead or lose their charge over time.
A quality battery voltage maintainer provides uniform voltage to the vehicle for longer periods of time compared to an unsupported battery. The bottom line is to make sure that before you begin any diagnostic or vehicle electronic scan using the PMBC Series, the car has proper battery support to provide the best possible outcomes.
When vehicle voltage levels fall below normal levels, diagnostic results are no longer accurate. Fluctuations in battery voltage can also cause additional codes to appear. If an unsupported battery fails, or fluctuates, during programming it can cause the programming to fail, which can be very costly.
Features
Smart Charging and Fixed Output Modes, Voltage adjustment, Digital Voltage Display, Handle, On/Off Switch
The PMBC Series Battery Charger Maintainer is the best choice to provide proper battery support, the most important step for the vehicle before beginning any Diagnostics, Calibration, Reflash, or electronic scan process.
Standard Battery chargers or a jump box are not recommended as they will not provide the proper battery support to the vehicle. Battery chargers can overcharge and "cook" a battery, and jump boxes can go dead or lose their charge over time.
A quality battery voltage maintainer provides uniform voltage to the vehicle for longer periods of time compared to an unsupported battery. The bottom line is to make sure that before you begin any diagnostic or vehicle electronic scan using the PMBC Series, the car has proper battery support to provide the best possible outcomes.
When vehicle voltage levels fall below normal levels, diagnostic results are no longer accurate. Fluctuations in battery voltage can also cause additional codes to appear. If an unsupported battery fails, or fluctuates, during programming it can cause the programming to fail, which can be very costly.
Features
- Provides a constant clean Fixed Output Voltage for Power Supply during diagnostics and reprogramming through a fully regulated DC output.
- Available in 75A, 100A and 120A outputs
- Output Voltage can be Fixed between 13Vdc - 16.5Vdc to meet vehicle battery requirements including Lithium (Typically 13.8V)
- Smart Battery Charging mode for general battery care and maintenance - 14.6Vdc / 13.6Vdc / 13.2Vdc (Factory Setting)
- Digital Output Voltage Display
- Includes 15 feet cables with clamps
- On/Off Switch
- LED indicator to show unit is on and working
- PMBC Spec-Sheet | Download
- PMBC-ADJ Info Sheet | Download
- PMBC ADJ - Manual | Download
- Overtemp protection
- Brownout Input
- Reverse Polarity
- Over and Under Current
- 2-Year Warranty (1 Year on Cables)
- Optional 45* Angled Clamps with 4-AWG Cable available
Smart Charging and Fixed Output Modes, Voltage adjustment, Digital Voltage Display, Handle, On/Off Switch