Manufacturer Info
QBase Universal Tile Mount
The QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs with superior strength and waterproofing. The installer can conform the secondary top flashing to fit virtually any roof tile, flat or curved.
The primary flashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from water intrusion. The top flashing is malleable, so it works equally well for curved and flat tile roofs. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase makes an extraordinarily strong foundation. Ideal for both retrofit and new roof solar panel installations.
Available in aluminum mill finish
The QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs with superior strength and waterproofing. The installer can conform the secondary top flashing to fit virtually any roof tile, flat or curved.
The primary flashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from water intrusion. The top flashing is malleable, so it works equally well for curved and flat tile roofs. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase makes an extraordinarily strong foundation. Ideal for both retrofit and new roof solar panel installations.
Available in aluminum mill finish
- Installation Guide | Download
- Three-Course Method (Waterproofing) | Download
- Engineering Report | Download
- CAD Blocks | Download
- Solar Mounting Solutions for Tile Roofs | Download
- Flashed at both the deck and top levels
- 18x18-inch malleable top flashing with spun aluminum cone
- 9x9-inch subflashing with spun aluminum cone
- QBase is the strongest off-the-shelf mechanical mount
- 3031 lbs. average ultimate pullout (Douglas fir)
- 803 lbs. average ultimate shear
- All exposed hardware is 18-8 stainless steel
- Attaches to roof structure with 2 or 4 fasteners
- Meets or exceeds tile roofing best practices
- 100% IBC compliant
- All fasteners and hardware included
- 25-year warranty
- Works with all leading racks
| Included in kit | Cast aluminum QBaseAluminum post, 1-1/4” x 6-1/2”9” x 9” spun aluminum cone subflashing18” x 18” spun aluminum cone malleable flashingTwo zinc-coated steel lag bolts, 5/16” x 3”Stainless steel machine bolt, 5/16" x 1"EPDM post collar/counter flashEPDM-bonded stainless steel sealing washer, 5/16” x 1-1/4”Stainless steel fender washerStainless steel split lock washer, 5/16”Grade-8 machine bolt, 5/16” x 3/4” |
| Pullout/shear | 3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shear |
| Tools needed for installation | Tape measure Drill with 7/32" wood bit Ratchet with 1/2" socket Caulking gun One tube of sealant compatible with roofing materials 30 lb felt paper Whisk broom or vacuum Roofer’s bar or shingle ripper |
| Applicable roof types | All tile roofs, curved or flat |
| Available finishes | Aluminum mill Bronze anodized |
| Flashing size | 18" x 18" top flashing; 9" x 9" subflashing |