SimpliPHI ESS 6 kW Inverter

The advanced design of the SimpliPHI ESS 6 kW Hybrid Inverter offers versatile applications that seamlessly integrate solar, generator and/or grid power in both AC and DC coupled configurations - on or off grid. This smart hybrid inverter with integrated MPPT is designed to pair with the SimpliPHI ESS 4.9 kWh battery, PHI 3.8, and AmpliPhi 3.8. The SimpliPHI 6 kW Hybrid Inverter is efficient and easy to use in homes and businesses, providing critical backup power, Time-of-Use savings, and peak demand shaving - reducing utility bills and creating peace of mind.

• Product Brochure | Download
• Installation Manual | Download
• Specification Sheet | Download
• 10 Year Limited Warranty | Download
• Return Policy | Download
• Terms and Conditions - Product Sales | Download
• Approved Battery List | Download

Scalable for any application
Scalable up to 9 inverters for a total of 54 kW of power.

Seamless switchover time
Less than 8 milliseconds of seamless switchover time protects sensitive electronics and minimizes downtime.

Off-grid and grid-connected systems
Simple installation for both AC coupled retrofit and new DC coupled systems.

Simple digital interface
Easy programming and monitoring of primary system functions on the LCD inverter interface.

Versatile installation options
IP 65 rating supports all weather conditions for both indoor or outdoor installations.

EnergyTrak enabled
Peace of mind that your system is working optimality with remote monitoring all from an app.

Warranty coverage
10-year limited warranty

SimpliPHI ESS 6kW Inverter
Overview
Model Designation	PHI-HB-INV-6kW
Environmental Protection	IP65
Protective Class	I
Battery Input Data
Nominal Battery Voltage	48VDC
DC Voltage Range	40 colspan='1' 62VDC
Maximum Charging Voltage	62VDC (Configurable)
Maximum Charging Current	100 A
Maximum Discharging Current	150 A
Charging Curve	3 Stages / Float
Charging Strategy for Li-Ion Battery	Self-adaption to BMS
Number of DC Connections	1
PV String Input Data
Maximum DC Input Power	7,500 W
Nominal DC Voltage	360VDC
Maximum DC Input Voltage	600VDC
MPPT Range	120 colspan='1' 550VDC
Start-up Voltage / Initial Feed In Voltage	125VDC / 160VDC
Maximum Input Current per MPPT	15 A
Maximum Isc PV	21 A
Maximum Inverter Back Feed Current to Array	0 A
Number of MPP Trackers	2 with 2 inputs each
AC Output Data (On-grid)
Nominal Apparent Power Output to Utility Grid	6,000 VA
Nominal Output Voltage	220VAC / 240VAC L1-L2, 110VAC / 120VAC L-N
Nominal Output Frequency	50 / 60 Hz
Output Frequency Range	47.5 colspan='1' 51.5 Hz or 59.3 colspan='1' 60.5 Hz
Output Voltage Range	105.5- 132VAC per phase
Inrush Current/Duration	30 A per phase / 20 ms
O/P DC Component	<100 mA
Output Power Factor	>0.99 (Adjustable from 0.9 leading to 0.9 lagging)
Output THDi (@Nominal Output)	<3%
Switch Over Time (Grid Down)	<8 ms
AC Output Data (Back-up)
Maximum Output Apparent Power	6,000VA
Instantaneous Power (100ms)	12,000VA
Surge Power (5 sec)	9,000VA
Maximum Output Active Power	6,000 W
Nominal Output Voltage	220VAC / 240VAC L1-L2, 110VAC / 120VAC L-N
Nominal Output Frequency - Auto Sensing	50/60 ( 0.1 Hz)
Output THDv (@Linear Load)	<3%
Output THDv (@PF 0.8 Non-Linear Load)	<5%
Parallel Function	Yes
Parallel Units	9
Automated Generator Start	Included
Efficiency
Maximum Solar to Utility Efficiency	96.50%
Maximum Battery to Load Efficiency	91.00%
Protection
Anti-Islanding Protection	Integrated
PV String Input Reverse Polarity Protection	Integrated
AFCI (Arc-Fault)	Integrated
Ground Fault Monitoring	Integrated
Insulation Resistor Detection	Integrated
Residual Current Monitoring Unit	Integrated
Output Over Current Protection	Integrated - 90 A per phase
Output Short Protection	Integrated
Rapid Shut Down Relay	Integrated
General Data
Operating Temperature Range	-13 - 140 F (-25 - 60 C)
Transformerless	Yes
Consumption Modes	UPS, Self-Consumption, TOU, Off- Grid Backup, Grid-Tied without Batteries
Relative Humidity	0 colspan='1' 90%
Operating Altitude	<13,123 ft (4,000 m)
Cooling	External Force Convection
Noise	<50 dB
Dimensions (W x H x D)	20.28 x 27.55 x 8.5 in (515 x 700 x 215.5 mm)
Noise	<50 dB
Dimensions (W x H x D)	20.28 x 27.55 x 8.5 in (515 x 700 x 215.5 mm)
Communications Interface
User Interface	LCD / Phone Application (iOS & Android)
Communication with BMS	CANBUS
Communications Between Inverters	CANBUS
Communication with Cloud - API with Grid Services	via EnergyTrakTM Gateway
Communication Port	RS-232
Intelligent Slot	RS232 / USB, BMS, Wi-Fi
Certifications / Standards
Grid Regulation	UL 1741SA / SB-2020, IEEE1547.1-2020
Safety Regulation	6-1, 6-4 IEC / EN 62109-1&2
EMC	EN 61000-6-2, EN 61000-6-3

Product Reviews